Nadszedł czas na składanie moto w całość. Przyszły lusterka i do razu zrobiłem mały zabieg aby poprawić ich wygląd. Na razie plan ogona zostaje odsunięty na bok. Tak na razie to wygląda przed oklejaniem.
Pokazywanie postów oznaczonych etykietą ohlins. Pokaż wszystkie posty
Pokazywanie postów oznaczonych etykietą ohlins. Pokaż wszystkie posty
niedziela, 5 maja 2013
sobota, 29 grudnia 2012
Regeneracja tuleji amortyzatora ohlins
Amortyzator firmy Ohlins ma zamiast zwykłych tulei przeguby kulowe. Przegub po obu stronach chronią prochowniki, kształtem przypominają podkładki wykonanej z pianki. Z biegiem czasu pianka się wykrusza i piach i kurz dostaje się do przegubu niszcząc go. Przypadkiem mój tato wpadł na pomysł ,że można to zrobić krążka który jest w "kołku" na płyty CD / DVD. Na pewno kojarzycie takie białe lub szare kółeczko na górze - to jest właśnie to. Grubość pasuje bo jest to zazwyczaj 3-4mm i wewnętrzna średnica ok 17mm, tylko z zewnątrz musimy go wyciąć na 26mm.
Górna tuleja ma 2 zabezpieczenia po obu stronach ( na wzór pierścienia segera). Pózniej wybijamy tuleję...
Przegub należało ponownie nasmarować i zabezpieczyć nowymi zamiennikami. Zrobiłem to amatorsko ponieważ należałoby wybić z łozyska tujeje
Górna tuleja ma 2 zabezpieczenia po obu stronach ( na wzór pierścienia segera). Pózniej wybijamy tuleję...
Przegub należało ponownie nasmarować i zabezpieczyć nowymi zamiennikami. Zrobiłem to amatorsko ponieważ należałoby wybić z łozyska tujeje
piątek, 21 grudnia 2012
Ohlins
http://www.splatshop.co.uk/
Ohlins Larger Rear Shock Bearing Seal
The O-ring seal to fit the smaller end of the Ohlins rear shock used to
seal out the elements and keep the grease where it should be.
The oring measures:
Outer diameter 22mm
Inner diameter 14mm
Width 4mm
Ohlins Larger Rear Shock Bearing Seal
The foam ring seal to fit the larger end of the Ohlins rear shock used
to seal out the elements and keep the grease where it should be.
The seal measures:
Outer diameter 26mm
Inner diameter 17mm
Width 3mm
Ohlins Rear Shock Bearing - Small
The smaller rose joint spherical bearing to fit the Ohlins Rear Shock.
Bearing dimensions
Outer diameter 22mm
Inner diameter 12mm
Width 10mm
Outer width 7mm
Ohlins Rear Shock Bearing - Large
Beta Part Code 28-93251, 28-93021, 002893251000, 002893021000Special spherical bearing for the Ohlins rear shock absorbers. This is the larger bearing found on the threaded end of the shock.
Bearing dimensions:
Outer Diameter 26mm
Inner Diameter 14mm
Inner width 15mm
Outer width 12.75mm
Ohlins Rear Shock Springs
To fit Ohlins rear shock, customise your shock to your weight. See the table below for details on what spring suits which weights.
Spring Rate | 40 N/mm | 47.5 N/mm | 55 N/mm | 65 N/mm | Progresive 62-74 N/mm |
Standard 70 N/mm |
75 N/mm | 80 N/mm |
Part number | 281-12 | 125S47.5N | 125S55N | 281-64 | 281-09 | 281-15 | 281-16 | 281-14 |
Rider Weight (KG) |
40-50
|
60-70
|
70
|
80-90
|
93-105
|
|||
50-60 |
70-80
|
90
|
85-95
|
|||||
Stones | 6 - 8 | 8 - 9.5 | 9.5 - 11 | 11 - 12.5 | 11 - 12.5 | 12.5 - 14 | 13.5 - 15 | 14.5 - 17 |
Subskrybuj:
Posty (Atom)